User guide

DescriptionField
When this check box is checked, ensure that IPSec is configured in the
network to provide end-to-end security. Failure to do so will expose
keys and other information.
SRTP Allowed
From the drop-down list box, choose the codec to use if a media
termination point is required for SIP calls.
MTP Preferred Originating Codec
Use this field to indicate whether a media termination point (MTP) is
used to implement features that H.323 does not support (such as hold
and transfer).
Check the Media Termination Point Required check box if you want to
use a media termination point to implement features. Uncheck the Media
Termination Point Required check box if you do not want to use a media
termination point to implement features.
Use this check box only for H.323 clients and those H.323 devices that
do not support the H.245 empty capabilities set or if you want media
streaming to terminate through a single source.
If you check this check box to require an MTP and this device becomes
the endpoint of a video call, the call works as audio only.
Media Termination Point Required
H.323 Information
For incoming calls to the phone, enter the pattern, from 0 to 24 digits,
that you want to use for caller ID.
Outgoing Caller ID Pattern
Choose one of the following options to specify which directory number
is sent:
• Originator—Send the directory number of the calling device.
• First Redirect Number-—Send the directory number of the
redirecting device.
• Last Redirect Number—Send the directory number of the last
device to redirect the call.
• First Redirect Number(external)—Send the directory number of
the redirecting device.
• Last Redirect Number(external)—Send the directory number of
the last device to redirect the call.
Calling Party Selection
Choose whether the central office transmits or blocks caller ID:
• Choose Allowed if you want the central office to send caller ID.
• Choose Restricted if you do not want the central office to send
caller ID.
• Default displays the caller ID unless the caller ID was restricted
in a previous level in the call stream.
Calling Party Presentation
Cisco Unified Communications Manager Bulk Administration Guide, Release 9.1(1)
OL-28580-01 55
BAT phone templates
REVIEW DRAFT - CISCO CONFIDENTIAL