User guide

DescriptionField
Enter the voice-messaging access pilot number for Cisco Unified
IP Phones.
Messages
Enter the URL for the services menu for Cisco Unified IP Phones.Services
Enter the URL that the phone uses to validate requests that are made to
the phones web server. If you do not provide an authentication URL,
the advanced features on the Cisco Unified IP Phone models that require
authentication will not function. Leave this field blank to accept the
default setting.
By default, this URL accesses a Cisco Unified IP Phone User Options
window that was configured during installation.
Authentication Server
Enter the host and port (for example, proxy.cisco.com:80) that are used
to proxy HTTP requests for access to non-local host addresses from the
phones HTTP client.
If the phone receives a URL such as www.cisco.com in a service and
the phone is not configured in the cisco.com domain, the phone uses
the proxy server to access the URL. If the phone is configured in the
cisco.com domain, the phone accesses the URL without using the proxy
because it is in the same domain as the URL.
Leave this field blank to accept the default setting.
Proxy Server
Enter the URL of the XML service that will appear as the idle display
on the Cisco Unified IP Phone LCD screen when the Phone has not
been used for the time that is specified in the Idle Timer field. For
example, you can display a logo on the LCD screen when the phone
has not been used for 5 minutes. Leave this field blank to use the default
value.
Idle
Enter the seconds that you want to elapse before the phone displays the
URL that is specified in the Idle field. Leave this field blank to use the
default value.
Idle Timer
Enter the secure URL that the phone uses to validate requests that are
made to the phone web server.
If you do not provide a Secure Authentication URL, the device
uses the nonsecure URL. If you provide both a secure URL
and a nonsecure URL, the device chooses the appropriate URL,
based on its capabilities.
Note
By default, this URL accesses a Cisco Unified CM User Options window
that was configured during installation.
Leave this field blank to accept the default setting.
Maximum length: 255
Secure Authentication URL
Cisco Unified Communications Manager Bulk Administration Guide, Release 9.1(1)
OL-28580-01 51
BAT phone templates
REVIEW DRAFT - CISCO CONFIDENTIAL