User guide

DescriptionField
From the drop-down list box, choose the Key Size that you want for
the certificate from the following options:
• 1024—This is the default option.
• <None>
This option prompts you to specify a value for the Key Size
for the certificate.
Note
• 2048
• 512
If you choose a higher key size than the default setting, the
phones take longer to generate the entropy that is required to
generate the keys. Key generation, which is set at low priority,
allows the phone to function while the action occurs. Depending
on the phone model, you may notice that key generation takes
up to 30 or more minutes to complete.
Note
Key Size (Bits)
This field, which supports the Install/Upgrade, Delete, and Troubleshoot
Certificate Operation options, specifies the date and time in which you
must complete the operation.
Operation Completes By
This field displays the progress of the certificate operation; for example,
<operation type> pending, failed, or successful, where operating type
equals the Install/Upgrade, Delete, or Troubleshoot Certificate Operation
options. You cannot change the information that displays in this field.
Certificate Operation Status
Expansion Module Information
Choose the expansion module if it is installed in the phone.Module 1
Enter the firmware load for the first Cisco Unified IP Phone Expansion
Module, if applicable. Leave this field blank to use the default load.
Module 1 Load Name
Choose the expansion module if it is installed in the phone.Module 2
Enter the firmware load for the second Cisco Unified IP Phone
Expansion Module, if applicable. Leave this field blank to use the default
load.
Module 2 Load Name
Cisco Unified IP Phone - External Data Locations
Enter the help text URL for the information button for
Cisco Unified IP Phones.
Information
Enter the URL of the directory server for Cisco Unified IP Phones.Directory
Cisco Unified Communications Manager Bulk Administration Guide, Release 9.1(1)
50 OL-28580-01
BAT phone templates
REVIEW DRAFT - CISCO CONFIDENTIAL