User guide

DescriptionField
Use this field to indicate whether a media termination point is used to
implement features that H.323 does not support (such as hold and
transfer).
Check the Media Termination Point Required check box if you want to
use an MTP to implement features. Uncheck the Media Termination
Point Required check box if you do not want to use an MTP to
implement features.
Use this check box only for H.323 clients and those H.323 devices that
do not support the H.245 empty capabilities set or if you want media
streaming to terminate through a single source.
Media Termination Point Required
Check this check box to indicate an unattended port on this device.Unattended Port
For phones that are running SIP and SCCP, check this check box to
require DTMF reception for this phone.
Require DTMF Reception
For phones that are running SCCP, check this check box to disable
RFC2833 support.
RFC2833 Disabled
Certification Authority Proxy Function (CAPF) Information (These parameters display only for devices
with the capability to support authentication or encryption.)
From the drop-down list box, choose the Certification Operation that
you want to perform from the following options:
• No Pending Operation—No pending Certification Operation lists
exist for this device. Choosing this option disables the remaining
CAPF fields.
• Install/Upgrade—Install or upgrade a Certification Operation.
• Delete—Delete a Certification Operation.
• Troubleshoot—Troubleshoot a Certification Operation.
Certificate Operation
Cisco Unified Communications Manager Bulk Administration Guide, Release 9.1(1)
48 OL-28580-01
BAT phone templates
REVIEW DRAFT - CISCO CONFIDENTIAL