User guide

DescriptionField
Associated Remote Destinations— Click the Add a New Remote Destination link to display the Remote
Destination Configuration page
Enter a name that identifies the remote destination.Name
Enter the telephone number for the destination. Include the area code
and any additional digits that are required to obtain an outside line.
Maximum field length equals 24 characters; individual characters can
take the values 0-9, *, and #. Cisco recommends that you configure the
caller ID of the remote destination.
Add the necessary translation pattern or route patterns to route the
destination number.
Destination Number
Enter the minimum time in milliseconds that must pass before the mobile
phone can be answered.
Range: 0 - 10,000 milliseconds
Default: 1,500 milliseconds
Answer Too Soon Timer
Enter the maximum time in milliseconds that can pass before the mobile
phone must be answered.
Range: 10,000 - 300,000 milliseconds
Default: 19,000 milliseconds
Answer Too Late Timer
Enter the time that elapses before the mobile phone rings when a call
is transferred from the desktop phone.
Range: 0 - 30,000 milliseconds
Default: 4,000 milliseconds
Delay Before Ringing Timer
From the drop-down list box, choose a time-of-day access record to
associate with this remote destination.
Time of Day Access
From the drop-down list box, choose a time zone to use for this remote
destination.
The time zone that you use for this remote destination is used
by the time-of-day access feature to allow or block calls to this
remote destination.
Note
Time Zone
Check the check box if you want calls that are answered by the desktop
phone to be sent to your mobile phone as the remote destination.
You must check this check box for Mobile Connect to work
with this remote destination.
Note
Mobile Phone
Check the check box to allow an incoming call to ring your desktop
phone and remote destination at the same time.
Enable Mobile Connect
Protocol Specific Information
Cisco Unified Communications Manager Bulk Administration Guide, Release 9.1(1)
OL-28580-01 45
BAT phone templates
REVIEW DRAFT - CISCO CONFIDENTIAL