User guide

DescriptionField
Check this check box to configure call display restrictions on a
call-by-call basis. When this check box is checked, Cisco Unified
Communications Manager ignores any presentation restriction that is
received for internal calls.
Ignore Presentation Indicators
(Internal Calls Only)
Check this check box to allow control of all CTI controllable devices
from CTI.
You can enable or disable this check box based on CTI Controllable
Device Type and Device Protocol. For example, a 7975 with SIP
protocol does not get supported by CTI; therefore, the check box should
be disabled. A 7975 with SCCP protocol does get supported by CTI;
hence check box should be enabled.
Allow Control of Device from CTI
This check box, which gets checked by default for all phones, indicates
that the phone is currently logged in to a hunt list (group). When the
phone gets added to a hunt list, the administrator can log the user in or
out by checking (and unchecking) this check box.
Users use the softkey on the phone to log their phone in or out of the
hunt list.
Logged into Hunt Group
If you are experiencing delayed connect times over SCCP to remote
sites, check the Remote Device check box in the Phone Configuration
window. Checking this check box tells Cisco Unified Communications
Manager to allocate a buffer for the phone device when it registers and
to bundle SCCP messages to the phone.
Because this feature consumes resources, be sure to check this check
box only when you are experiencing signaling delays for phones that
are running SCCP. Most users do not require this option.
Remote Device
Check this check box to designate a phone as “protected.” This enables
the phone to play a two-second tone notifying the user when a call is
both encrypted and both phones are configured as protected devices.
The tone plays for both parties when the call is answered. The tone does
not play unless both phones are “protected” and the call occurs over
encrypted media.
For a detailed description of the secure-tone feature and the
configuration requirements, see the Cisco Unity Connection
System Administration Guide.
Tip
Protected Device
Check this check box to make this device a Hotline device. Hotline
devices can only connect to other Hotline devices. This feature is an
extension of PLAR, which configures a phone to automatically dial one
directory number when it goes off-hook. Hotline provides additional
restrictions that you can apply to devices that use PLAR.
To implement Hotline, you must also create a softkey template without
supplementary service softkeys, and apply it to the Hotline device.
Hotline Device
Cisco Unified Communications Manager Bulk Administration Guide, Release 9.1(1)
OL-28580-01 41
BAT phone templates
REVIEW DRAFT - CISCO CONFIDENTIAL