User guide

DescriptionField
From the drop-down list box, choose the Services Provisioning setting
that you want to use from the following values:
• Internal
• External URLs
• Both
• Default: Internal
This parameter controls whether the phone uses the services provisioned
from the configuration file (Internal), services received from the Services
URLs (External URLs), or both. The External URLs option provides
backward compatibility with third party provisioning servers. The Both
option allows users to subscribe to the services specified in the
configuration file while also appending services from an external
provisioning server.
This is a required field.
Services Provisioning
Enter the custom phone load, if applicable.
Any value that is entered in this field overrides the default
value for the chosen model.
Note
For more information about Cisco IP Phone software and configuration,
refer to the Cisco IP Phone Administration Guide for Cisco Unified
Communications Manager, which is specific to the phone model.
Phone Load Name
From the drop-down list box, enable or disable the Single Button
Barge/cBarge feature for this device or choose Default to use the service
parameter setting.
• Off—This setting disables the Single Button Barge/cBarge feature;
however, the regular Barge or cBarge features will still work.
• Barge—This setting enables the Singe Button Barge feature.
• cBarge—This setting enables the Single Button cBarge feature.
• Default—This setting uses the Single Button Barge/cBarge setting
that is in the service parameter.
For more configuration information, refer to Barge and
Privacy in the Cisco Unified Communications Manager
Features and Services Guide.
Tip
Single Button Barge
Cisco Unified Communications Manager Bulk Administration Guide, Release 9.1(1)
OL-28580-01 37
BAT phone templates
REVIEW DRAFT - CISCO CONFIDENTIAL