User guide

Copy BAT phone template

You can copy the properties of an existing phone template into a new phone template when you want to change

only a few fields. The copy duplicates all the values that were specified in the original template.

Ensure that the new template that you create is the same device type as the original template, such as

Cisco IP Phone 7975.

Note

Procedure

Step 1

Find the Phone Template that you want to copy.

Step 2

Copy the Phone Template. Do one of the following:

a) In the Phone Template Configuration window, verify that this is the template that you want to copy and

click Copy.

b) In the Find and List Phone Templates window, click the icon in the Copy column that corresponds to

the phone template that you want to copy.

c) To copy a template and all the lines associated with that template, in the Find and List Phone Templates

window, click the icon in the Super Copy column that corresponds to the phone template with the lines

that you want to copy.

Step 3

In the Template Name field, enter a name for the template.

The name can contain up to 50 alphanumeric characters.

Example:

Sales_7975.

Step 4

Update the fields as needed for the new template.

See Table 2: Field descriptions for adding a line to a BAT template, on page 58 for more information.

Step 5

Click Save.

The template that is added to BAT displays in the Phone Templates column on the left.

What to Do Next

You can continue to add or update phone lines, IP services, and speed dials to the template.