User guide

The Trace Configuration window displays.
Step 2
Choose the Cisco Unified Communications Manager server, from the Server drop-down list box.
Step 3
Choose one of the following services from the Configured Services drop-down list box.
• For BAT trace file settings, choose Cisco Bulk Provisioning Service
• For TAPS trace file settings, choose TAPS Service
Step 4
To activate the trace feature, click the Trace On check box.
Step 5
In the Trace Filter Settings, choose the trace level that you want to set from the Debug Trace Level drop-down
list box.
Click the desired debug trace level as described in the following table.
Table 45: Debug trace levels
DescriptionLevel
Traces very severe error events that may cause the application to abort.Fatal
Traces alarm conditions and events. Used for all traces that are generated
in abnormal path. Uses minimum number of CPU cycles.
Error
Traces potentially harmful situations.Warn
Traces the majority of servlet problems and has a minimal effect on system
performance.
Info
Traces all State Transition conditions plus media layer events that occur
during normal operation.
Trace level that turns on all logging.
Debug
Step 6
Check the check boxes for Cisco Bulk Provisioning Service Trace Fields and Device Name Based Trace
Monitoring, as needed.
Step 7
In the Trace Output Settings, enter values for the maximum number of files, maximum number of lines per
file, and maximum number of minutes per file, and click Update.
The system enables the feature, and the trace files get written to the following locations on the server:
• BAT trace files: /var/log/active/cm/trace/bps/log4j
• TAPS trace files: /var/log/active/cm/trace/taps/log4j
Step 8
Click Update.
What to Do Next
After you have configured the information that you want to include in the trace files, you can collect and view
trace files using the trace and log central option in the Real-Time Monitoring Tool (RTMT). For more
information, refer to Cisco Unified Communications Manager Serviceability System Guide.
Cisco Unified Communications Manager Bulk Administration Guide, Release 9.1(1)
570 OL-28580-01
Enable Trace to view configuration files
REVIEW DRAFT - CISCO CONFIDENTIAL