User guide

Procedure
Step 1
Find the Phone Template to which you want to add BLF speed directed call park.
Step 2
In the Phone Template Configuration window, do one of the following:
a) Click Add a new BLF Directed Call Park in the Associated Information area.
b) Choose Add/Update BLF Directed Call Park from the Related Links drop-down list box in the upper,
right-hand corner of the window.
A popup window displays. In this window, you can designate BLF Directed Call Park buttons for
Cisco Unified IP Phones and expansion modules.
Step 3
In the Unassigned Busy Lamp Field/Directed Call Park Settings area, choose the directory number from
the drop-down list box. You can click Find to search for directory numbers.
Step 4
In the Label field, enter a label that corresponds to the BLF Directed Call Park number.
Step 5
In the ASCII Label field, enter the corresponding ASCII label for the BLF Directed Call Park number.
Step 6
Click Save.
BAT inserts the BLF Directed Call Park settings in the template, and the popup window closes.
Related Topics
Find BAT phone template, on page 24
Add or update Intercom template in BAT template
You can add one or more Intercom templates to the BAT template, or update existing Intercom templates in
the BAT template The button template in use for the BAT template determines the number of lines that you
can add or update. You can create a master phone template that has multiple lines. Then, you can use the
master template to add phones with a single line or up to the number of lines in the master template. All phones
or user device profiles in this batch will use the settings that you choose for the intercom template.
Cisco recommends that you use alphanumeric characters for intercom template, so if numbers are given, a
chance exists of this conflicting with an actual directory number. This would also avoid conflicts with features
such as Call Pickup group number and Call Park number.
The maximum number of lines that display for a BAT template depends on model and button template that
you chose when you created the BAT phone template. For some Cisco Unified IP Phone models, you can
also add Cisco Unified IP Phone services and speed dials to the template.
Procedure
Step 1
Find the Phone Template to which you want to add the intercom template.
Step 2
In the Phone Template Configuration window, click Intercom [1] - Add a new Intercom in the Associated
Information area.
The Intercom Template Configuration window displays.
Step 3
Enter or choose the appropriate values for the intercom template settings.
See Table 2: Field descriptions for adding a line to a BAT template, on page 58 for more information.
Step 4
Click Save.
Cisco Unified Communications Manager Bulk Administration Guide, Release 9.1(1)
30 OL-28580-01
BAT phone templates
REVIEW DRAFT - CISCO CONFIDENTIAL