User guide

Related Topics
Start, stop and restart BPS, on page 562
Topics related to Tool for Auto-Registered phone support user locales, on page 558
Start, stop and restart BPS
You can manually stop or restart the Bulk Provisioning Service (BPS).
The BPS starts automatically after it is activated using Cisco Unified Communications Manager
Serviceability.
Note
Procedure
Step 1
In Cisco Unified Communications Manager Serviceability, choose Tools > Control Center - Feature Services.
The Control Center–Feature Services window displays.
Step 2
Choose the Cisco Unified Communications Manager server from the Servers drop-down list box.
Cisco Bulk Provisioning Service displays in list under Service Name column, in the Database and Admin
Services area.
If BPS is already activated, the Activation Status will display as Activated.Note
Step 3
Check the check box corresponding to BPS and do one of the following:
a) To restart BPS, click Restart.
The service restarts, and the message, Service Successfully Restarted, displays.
b) To stop BPS, click Stop.
The service stops, and the message, Service Successfully Stopped, displays.
c) To start the stopped BPS, click Start.
The service starts, and the message, Service Successfully Started, displays.
Deactivate BPS and log out
After you deactivate BPS you can log out of the tool when you no longer need to use itl.
Procedure
Step 1
In Cisco Unified Communications Manager Serviceability, choose ToolsService Activation.
The Service Activation window displays.
Step 2
Choose the Cisco Unified Communications Manager server from the Servers drop-down list box.
Cisco Unified Communications Manager Bulk Administration Guide, Release 9.1(1)
562 OL-28580-01
Start, stop and restart BPS
REVIEW DRAFT - CISCO CONFIDENTIAL