User guide

b) To add more services, repeat Step 3, on page 27 through Step 6, on page 27.
c) To add all the services to the template, click Update.
After you are done adding or updating services for the selected template, proceed to the next step.
Step 7
Close the popup window.
What to Do Next
You can continue to add speed dials to the selected template.
Related Topics
Add or update speed dials in BAT template, on page 28
Find BAT phone template, on page 24
Add or update speed dials in BAT template
You can add and update speed dials in the BAT template for phones and Cisco VGC phones if the Phone
Button Template provides speed-dial buttons. The Phone Button Template in use for the BAT template
determines the number of available speed-dial buttons.
Procedure
Step 1
Find the Phone Template to which you want to add speed dials.
Step 2
From the Phone Template Configuration window, do one of the following:
a) Click Add a new SD in the Associated Information area.
b) Choose Add/Update Speed Dials from the Related Links drop-down list box in the upper, right-hand
corner of the window.
A popup window displays. In this window, you can designate speed-dial buttons for Cisco Unified IP Phones
and expansion modules.
Step 3
In the Speed Dial Settings area, enter the phone number, including any access or long-distance codes, in the
Number field.
Draft comment: Bharathi: The below note is added for Kirra 9.0 release (Pause in Speed Dial feature)
When you enter the phone number, it can be followed by Forced Authorized Code (FAC)/Client
Matter Code (CMC) if applicable. You can enter the Phone number, FAC, CMC either in sequence
or separated by a comma (,). The Speed dial may include any PIN, Password or any other digits to
be sent as DTMF digits after the call is connected. If you require a pause while connecting through
speed dial, you can enter one or more comma (,) where each comma represents a pause of 2 seconds.
DTMF digits will be sent after the call is connected and the appropriate pause duration corresponding
to the number of commas is entered. For more information on pause in speed dial, see the Cisco
Unified Communications Manager Administration Guide.
Note
Cisco Unified Communications Manager Bulk Administration Guide, Release 9.1(1)
28 OL-28580-01
BAT phone templates
REVIEW DRAFT - CISCO CONFIDENTIAL