User guide

CHAPTER 67
Insert, update, and delete EMCC devices
This chapter provides information to use Cisco Unified Communications Manager Bulk Administration
(BAT) to insert, update, and delete EMCC devices in the Cisco Unified Communications Manager database.
• Insert EMCC devices, page 513
• Update EMCC devices, page 514
• Delete EMCC devices, page 515
Insert EMCC devices
Use BAT to add EMCC devices to the Cisco Unified Communications Manager database.
Each EMCC device bears a unique name in the format: EMCC1, EMCC2, and so on. BAT assigns EMCC
device numbers by obtaining the last one used. If any other entity like, Phone, UDP, RDP, or EMCC Templates
are named in the same format (EMCC1, EMCC2), then BAT Insert EMCC generates an error for duplicate
naming. Therefore, ensure that the above entities with the same name format, are renamed before inserting
EMCC Devices.
Example
The Admin user wants to insert 27 numbers of EMCC devices. First, BAT searches for the last EMCC device
serial number used in the UCM say, EMCC123. Then it starts inserting devices from the next number onwards:
EMCC124 to EMCC150. If UDP devices have already used the following names: EMCC135, EMCC137,
and EMCC150, then BAT Insert EMCC will generate a naming error. EMCC devices with the above names
do not get created unless the UDP devices are renamed.
Before You Begin
Before you insert EMCC devices, you must have a valid EMCC template set as default. Set the default template
following the update EMCC devices procedure.
Procedure
Step 1
Choose Bulk Administration > EMCC > Insert/Update EMCC.
Cisco Unified Communications Manager Bulk Administration Guide, Release 9.1(1)
OL-28580-01 513