User guide

The Remote Destination Template Configuration window displays.

Step 3

Enter configuration details in the fields that display.

See Remote destination profile template field descriptions, on page 460 for field descriptions.

Step 4

Click Save.

What to Do Next

When the status indicates that the transaction has completed, you can add line attributes.

Add or Update lines in remote destination profile template

You can add one or more lines to the BAT template or to update existing lines.

Procedure

Step 1

Find the RDP Template to which you want to add line.

Step 2

In the Remote Destination Profile Template Configuration window, click Line [1] Add a new DN in the

Association Information area.

Step 3

Enter or choose the appropriate values for the line settings that are described in Table 2: Field descriptions

for adding a line to a BAT template, on page 58, and click Save.

BAT adds the line to the phone template configuration. All RDPs in this batch will use the settings that you

choose for this line.

After you enter or choose the appropriate values, you must return to this page to complete the

procedure.

Note

Step 4

Repeat Step 2, on page 459 through Step 3, on page 459 to add settings for any additional lines.

If you choose Back to Find/List from the Related Links drop-down list box in the upper, right

corner of the Line Template Configuration window, the Find and List Directory Numbers window

displays. To find existing line template, enter the appropriate search criteria and click Find. To add

a new line template, click Add New on Find and List Line Template window.

Note

Cisco recommends that you use alphanumeric characters for Line Template. This is because, if numbers are

given, a chance exists of conflict with an actual directory number. Using this method, you also avoid conflicts

with features such as Call Pickup group number, Call Park number, and so on.