User guide

CHAPTER 57
Access list
This chapter provides information to use the Bulk Administration menu to insert, delete, and export access
lists. An access list comprises a sequential list that consists of at least one permit statement and possibly one
or more deny statements that apply to IP addresses and possibly upper-layer IP protocols. The access list
has a name by which it is referenced. Many software commands accept an access list as part of their syntax.
• Insert access lists, page 449
• Delete access lists, page 450
• Export access lists, page 450
Insert access lists
You can insert access lists using BAT.
Before You Begin
• You must have a data file in comma separated value (CSV) format that contains the unique details for
the access lists.
• Upload the data files by choosing the relevant target and function for the transaction.
Procedure
Step 1
Choose Bulk Administration > Mobility > Access List > Access List Insert.
The Insert Access List Configuration window displays.
Step 2
From the File Name drop-down list box, choose the file that you uploaded.
Step 3
To override the existing configuration, check the Override the existing configuration check box.
Step 4
In the Job Information section, enter a description for the job.
The default description specifies Insert Access List.
Step 5
You can choose to run the job immediately or later by selecting the corresponding radio button.
Step 6
To create a job for inserting the access list, click Submit.
A message in the Status section lets you know that the job was submitted successfully.
Cisco Unified Communications Manager Bulk Administration Guide, Release 9.1(1)
OL-28580-01 449