User guide

Step 2
Create a CSV file for CMC or FAC and enter the CMC and FAC configuration information.
Step 3
To update the Cisco Unified Communications Manager database, insert the CSV file in BAT.
Step 4
Enable FAC or CMC by adding or updating route patterns in Cisco Unified Communications Manager
Administration.
•
Cisco Unified Communications Manager Administration Guide
•
Cisco Unified Communications Manager Features and Services Guide
Step 5
Update your dial plan documents or keep a printout of the BAT CSV file with your dial plan documents.
Refer to your dial plan documents.
Step 6
Provide all necessary information, for example, codes, to users and explain how the features work.
Refer to the Cisco Unified Communications Manager Features and Services Guide.
Related Topics
Topics related to CMC and FAC configuration, on page 431
Create CMC and FAC CSV data file using BAT.xlt
You can create the CSV file for CMC or FAC using the BAT spreadsheet BAT.xlt. You must create two
separate CSV files, one for CMC and one for FAC.
The BAT.xlt file exists on the first node of the Cisco Unified Communications Manager server; however,
you normally do not have Microsoft Excel installed on the server. In that case, copy the file from the first
node and move it to a local machine that has Microsoft Excel installed.
Note
Before You Begin
Review important considerations in CMC and FAC setup using BAT, on page 425 before you use BAT to
configure CMC or FAC.
Procedure
Step 1
Choose Bulk Administration > Upload/Download Files.
The Find and List Files window opens.
Step 2
Click Find and download the BAT.xlt file.
Step 3
Copy BAT.xlt to a local machine where Microsoft Excel is installed.
Step 4
To open the BAT Spreadsheet, locate and double-click the BAT.xlt file.
Step 5
When prompted, click Enable Macros to use the spreadsheet capabilities.
Step 6
Click one of the following tabs:
• Insert CMC—If you are creating a CMC CSV file
• Insert FAC—If you are creating a FAC CSV file
Cisco Unified Communications Manager Bulk Administration Guide, Release 9.1(1)
OL-28580-01 427
Create CMC and FAC CSV data file using BAT.xlt
REVIEW DRAFT - CISCO CONFIDENTIAL