User guide

CHAPTER 50
Gateway insertions
This chapter provides information to insert Cisco-supported gateways into Cisco Unified Communications
Manager database.
• CSV data file creation for Cisco VG200 gateways, page 405
• Create CSV data file for Cisco Catalyst 6000 (FXS) ports, page 407
• CSV data files creation for Cisco VG224 gateways and ports, page 408
• CSV data file creation for Cisco VG202 and VG204 gateways, page 410
• Insert gateways and ports to Cisco Unified Communications Manager, page 412
CSV data file creation for Cisco VG200 gateways
You can create a CSV data file to insert Cisco VG200 gateways and ports in the Cisco Unified Communications
Manager database. Use either the BAT spreadsheet or a text editor to create the CSV data file.
Related Topics
Create text-based CSV file for Cisco VG200 gateways, on page 598
Create CSV data files for Cisco VG200 gateways and T1 CAS, T1 PRI, E1 PRI, FXS or FXO ports using
BAT spreadsheet, on page 405
Create CSV data files for Cisco VG200 gateways and T1 CAS, T1 PRI, E1 PRI, FXS or FXO ports
using BAT spreadsheet
Use the BAT spreadsheet to create the CSV data file that contains the details, such as domain name, MGCP
description, and port identifier, for individual T1 CAS, T1 PRI, E1 PRI, FXS or FXO ports.
For T1 CAS only, the ports that you specify in the BAT spreadsheet must be the same ports that you specified
in the VG200 template. In the CSV data file, you can specify none, some, or all ports that were configured in
the template. Do not configure any ports in the CSV data file that were not also configured in the template,
or an error will result when you attempt to insert the BAT VG200 template and the CSV file.
For example, if you configured ports 1,2,3, and 4 in the template, you could configure none of the ports, or
ports 1, 2, 3, and 4, or only ports 1 and 2 in the CSV file, and the insertion would be accepted. But if you
Cisco Unified Communications Manager Bulk Administration Guide, Release 9.1(1)
OL-28580-01 405