User guide

Step 6
In the IP Phone Lines Maximums area, enter the maximum values for the Maximum Number of Lines
field.
Step 7
To save your custom file format, click Save. The name of the file format displays in the File Format Names
list in the Gateway File Format Find and List window.
Copy existing gateway file format
You can copy an existing gateway file format.
Procedure
Step 1
Find the gateway file format you want to copy.
Step 2
In the Search Results area, choose a file format that you want to copy.
The Gateway File Format Configuration window displays.
Step 3
To make a copy of the chosen file format, click Copy.
To copy the file format, you can also click the corresponding Copy icon in the Gateway File Format
Find and List window.
Tip
Step 4
In the Format Name field, enter a new name for the copied format.
Step 5
After making your changes, click Save to save the copied file format with changes in the list.
Related Topics
Find gateway file format, on page 399
Modify existing gateway file format, on page 401
Modify existing gateway file format
Use BAT to modify an existing gateway file format. You can modify custom file formats only.
Procedure
Step 1
Find the gateway file format that you want to modify.
Step 2
In the Search Results area, choose a file format that you want to modify.
The Gateway File Format Configuration window displays.
Step 3
Modify the format using the following methods:
a) To add new fields, choose them from the Device Fields or Line Fields box, then click the arrow to move
the chosen fields into the Selected Device Field or Selected Line Fields Order box.
b) To remove fields, choose them from the Selected Device Fields or Selected Line Fields Order box, then
click the arrow to move the selected fields into the Device Field or Line Fields box.
You cannot remove the required fields: Gateway Name and Description.Note
Cisco Unified Communications Manager Bulk Administration Guide, Release 9.1(1)
OL-28580-01 401
Gateway file format configuration
REVIEW DRAFT - CISCO CONFIDENTIAL