User guide

DescriptionField
Port Details
Choose the direction of calls that pass through this port:
• Inbound—Use for incoming calls only.
• Outbound—Use for outgoing calls.
• Both Ways—Use for inbound and outbound calls.
Port Direction
Any outbound call on a gateway can send directory number information.
Choose which directory number is sent:
• Originator—Send the directory number of the calling device.
• First Redirect Number—Send the directory number of the redirecting
device.
• Last Redirect Number—Send the directory number of the last device
to redirect the call.
• First Redirect Number (External)—Send the directory number of the
first redirecting device with the external phone mask applied.
• Last Redirect Number (External)—Send the directory number of the
last redirecting device with the external phone mask applied.
Calling Party Selection
Choose the caller ID type:
• ANI—Choose this type to use the Asynchronous Network Interface
(ANI) caller ID type.
• DNIS—Choose this type to use the Dialed Number Identification
Service (DNIS) caller ID type.
Caller ID Type
Enter the pattern that you want to use for calling line ID, from 0 to 24
digits.
For example, in North America:
• 555XXXX = Variable calling line ID, where X equals an extension
number. The CO appends the number with the area code if you do
not specify it.
• 5555000 = Fixed calling line ID, where you want the Corporate
number to be sent instead of the exact extension from which the call
is placed. The CO appends the number with the area code if you do
not specify it.
Caller ID DN
Cisco Unified Communications Manager Bulk Administration Guide, Release 9.1(1)
OL-28580-01 397
Port configuration settings
REVIEW DRAFT - CISCO CONFIDENTIAL