User guide

DescriptionField
Use this field for analog access ports that connect to a voice-messaging
system.
Set the SMDI Port Number equal to the actual port number on the
voice-messaging system to which the analog access port connects.
Voice-mail logical ports typically must match physical ports for
the voice-messaging system to operate correctly.
Note
SMDI Port Number (0-4096)
Product-Specific Configuration
The gateway manufacturer specifies the model-specific fields under
product-specific configuration. Because they are dynamically configured,
they can change without notice.
To view field descriptions and help for product-specific configuration
items, click the “?” information icon to the right of the Product Specific
Configuration heading to display help in a popup dialog box.
If you need more information, refer to the documentation for the specific
gateway that you are configuring or contact the manufacturer.
Model-specific configuration
fields that the gateway
manufacturer defines
E and M ports for digital access T1 field descriptions
Use the following field descriptions when you are adding or updating values for E&M ports for the T1 CAS
trunks on a Cisco VG200 gateway.
Some fields display the values that were configured in Cisco Unified Communications Manager Administration.
In the BAT user interface, field names that have an asterisk require an entry. Consider an entry in fields without
an asterisk as optional.
The following table describes the E & M port configuration settings.
Table 35: E & M port configuration settings
DescriptionField
From the Port Type drop-down list box, choose EANDM.Port Type
Choose whether you want to add and configure all available ports, a single
port, or a range of ports by setting values for the Beginning Port Number
and Ending Port Number fields:
• To specify a range of ports, choose appropriate values for Beginning
Port Number and Ending Port Number.
• To create a single port, choose the same number in the Beginning
Port Number and Ending Port Number fields.
• To add all available ports, choose All Ports for both the Beginning
Port Number and Ending Port Number fields.
Beginning Port Number
Ending Port Number
Cisco Unified Communications Manager Bulk Administration Guide, Release 9.1(1)
396 OL-28580-01
Port configuration settings
REVIEW DRAFT - CISCO CONFIDENTIAL