User guide

DescriptionField
This field applies to DMS-100 protocol only. Check the check box
to indicate that an Interface Identifier is present. By default, the
box remains unchecked.
MCDN Channel Number Extension Bit
Set to Zero
This field applies to DMS-100 protocol only. Enter the value that
you obtained from the PBX provider. Valid values range from 0
to 255.
Send Calling Name in Facility IE
This field applies to DMS-100 protocol only. Check the check box
to indicate that an Interface Identifier is present. By default, the
box remains unchecked.
Interface Identifier Present
This field applies to DMS-100 protocol only. Enter the value that
you obtained from the PBX provider. Valid values range from 0
to 255.
Interface Identifier Value
Choose whether you want the Cisco Unified Communications
Manager to allow or block the connected party’s phone number.
Choose Default if you do not want to change the connected line
ID presentation. Choose Allowed if you want Cisco Unified
Communications Manager to send “Connected Line ID Allowed.”
Choose Restricted if you want Cisco Unified Communications
Manager to send “Connected Line ID Restricted.”
Connected Line ID Presentation
UUIE Configuration
Check this check box to enable passing MLPP information through
the PRI 4ESS UUIE field. This box is used for working along with
DRSN switch.
The system makes this check box available only if the PRI Protocol
Type value of PRI 4ESS is specified for this gateway.
The default value specifies unchecked.
Passing Precedence Level Through
UUIE
Enter the value for the security access level. Valid values include
00 through 99. The system makes this field available only if the
Passing Precedence Level Through UUIE check box is checked.
The default value specifies 2.
Security Access Level
Geo Location Configuration
From the drop-down list box, choose a geo location.
You can choose the Unspecified geo location, which designates
that this device does not associate with a geo location.
You can also choose a geolocation that has been configured with
the System > Geolocation Configuration menu option.
Geo Location
Cisco Unified Communications Manager Bulk Administration Guide, Release 9.1(1)
OL-28580-01 393
Gateway configuration settings
REVIEW DRAFT - CISCO CONFIDENTIAL