User guide

DescriptionField
Choose the format for the numbering plan in called party directory
numbers.
Cisco Unified Communications Manager sets the called DN
numbering plan. Cisco recommends that you do not change the
default value unless you have extensive experience with dialing
plans, such as NANP or the European dialing plan. You may need
to change the default in Europe because Cisco Unified
Communications Manager does not recognize European national
dialing patterns. You can also change this setting when you are
connecting to PBXs that are using routing as a non-national type
number.
Choose one of the following options:
• Communications Manager—For the default setting, the Cisco
Unified Communications Manager sets the Numbering Plan
in the directory number.
• ISDN—Use when you are dialing outside the dialing plan
for your country.
• National Standard—Use when you are dialing within the
dialing plan for your country.
• Private—Use when you are dialing within a private network.
• Unknown—This option specifies that the dialing plan is
unknown.
Called Numbering Plan
Cisco Unified Communications Manager Bulk Administration Guide, Release 9.1(1)
390 OL-28580-01
Gateway configuration settings
REVIEW DRAFT - CISCO CONFIDENTIAL