User guide

DescriptionField
Choose the format for the type of number in called party directory
numbers. Cisco Unified Communications Manager sets the called
directory number (DN) type. Cisco recommends that you do not
change the default value unless you have extensive experience
with dialing plans, such as NANP or the European dialing plan.
You may need to change the default in Europe because Cisco
Unified Communications Manager does not recognize European
national dialing patterns. You can also change this setting when
you are connecting to PBXs that use routing as a non-national type
number.
Choose one of the following options:
• Communications Manager—For the default setting, the Cisco
Unified Communications Manager sets the directory number
type.
• International—Use when you are dialing outside the dialing
plan for your country.
• National—Use when you are dialing within the dialing plan
for your country.
• Unknown—This option specifies that the dialing plan is
unknown.
Called Party IE Number Type Unknown
Cisco Unified Communications Manager Bulk Administration Guide, Release 9.1(1)
OL-28580-01 389
Gateway configuration settings
REVIEW DRAFT - CISCO CONFIDENTIAL