User guide

DescriptionField
Choose the automated alternate routing (AAR) group for this device.
The AAR group provides the prefix digits that are used to route calls
that are otherwise blocked due to insufficient bandwidth. An AAR
group setting of None specifies that no rerouting of blocked calls will
be attempted.
AAR Group
From the drop-down list box, choose the locale that is associated with
the gateway. The network locale identifies a set of detailed information
to support the hardware in a specific location. The network locale
contains a definition of the tones and cadences that the device uses in
a specific geographic area.
Choose only a network locale that is already installed and
that the associated devices support. The list contains all
available network locales for this setting, but not all are
necessarily installed. If the device is associated with a network
locale that it does not support in the firmware, the device will
fail to come up.
Note
Network Locale
Cisco Unified Communications Manager Bulk Administration Guide, Release 9.1(1)
374 OL-28580-01
Gateway configuration settings
REVIEW DRAFT - CISCO CONFIDENTIAL