User guide

DescriptionField
Configured Slots, VICs, and Endpoints
For the available slot on the VG224 gateway, select Analog from the
drop-down list box.
Module in Slot 2
For the available subunit 0 on the VG224 gateway, choose 24FXS as
the subunit from the drop-down list box.
Be aware that only Module in Slot 2, and Subunit 0 are available
for VG224 gateways.
Note
Subunit 0
VG202 and VG204 gateway template field descriptions
The following table provides detailed descriptions for VG202 and VG204 gateway template configuration
settings.
Table 29: VG202 and VG204 gateway configuration settings
DescriptionField
Enter a name of up to 64 characters that identifies the Cisco VG202 or
VG204 gateway template.
Template Name
Enter a description that clarifies the purpose of the device.Description
From the drop-down list box, choose a Cisco Unified Communications
Manager redundancy group.
A Cisco Unified Communications Manager redundancy group includes
a prioritized list of up to three Cisco Unified Communications Managers.
The first Cisco Unified Communications Manager in the list serves as
the primary Cisco Unified Communications Manager. If the primary
Cisco Unified Communications Manager is not available or fails, the
gateway attempts to connect with the next Cisco Unified Communications
Manager in the list and so on.
Cisco Unified Communications
Manager Group
Configured Slots, VICs, and Endpoints
For the available slot on the VG202 or VG204 gateway, select Analog
from the drop-down list box.
Module in Slot 0
For the available subunit 0 on the VG202 or VG204 gateway, choose
2FXS as the subunit from the drop-down list box.
Be aware that only Module in Slot 0, and Subunit 0 are available
for VG202 and VG204 gateways.
Note
Subunit 0
Cisco Unified Communications Manager Bulk Administration Guide, Release 9.1(1)
OL-28580-01 367
Gateway configuration settings
REVIEW DRAFT - CISCO CONFIDENTIAL