User guide

DescriptionField
For the available slot on the VG200 gateway, choose from the following
type of modules:
• NM-1V—Network Module-1Voice has one voice interface card
(VIC) in Sub-Unit 0 for FXS or FXO.
• NM-2V—Network Module-2Voice has two VICs, one in Sub-Unit
0 and one in Sub-Unit 1 for either FXS or FXO.
• NM-HDV—Network Module-High Density Voice has one VIC
in Sub-Unit 0 either for T1 CAS or T1 PRI, or for E1 PRI.
• None—No network modules are installed.
Module in Slot 1
Product-Specific Configuration
The gateway manufacturer specifies the model-specific fields under
product-specific configuration. Because they are dynamically configured,
they can change without notice.
To view field descriptions and help for product-specific configuration
items, click the “?” information icon to the right of the Product Specific
Configuration heading to display help in a popup dialog box.
If you need more information, refer to the documentation for the specific
gateway that you are configuring or contact the manufacturer.
Model-specific configuration
fields defined by the gateway
manufacturer
VG224 gateway template field descriptions
The following table provides detailed descriptions for VG224 gateway template configuration settings.
Table 28: VG224 gateway configuration settings
DescriptionField
Enter a name of up to 64 characters that identifies the Cisco VG224
gateway template.
Template Name
Enter a description that clarifies the purpose of the device.Description
From the drop-down list box, choose a Cisco Unified Communications
Manager redundancy group.
A Cisco Unified Communications Manager redundancy group includes
a prioritized list of up to three Cisco Unified Communications Managers.
The first Cisco Unified Communications Manager in the list serves as
the primary Cisco Unified Communications Manager. If the primary
Cisco Unified Communications Manager is not available or fails, the
gateway attempts to connect with the next Cisco Unified Communications
Manager in the list and so on.
Cisco Unified Communications
Manager Group
Cisco Unified Communications Manager Bulk Administration Guide, Release 9.1(1)
366 OL-28580-01
Gateway configuration settings
REVIEW DRAFT - CISCO CONFIDENTIAL