User guide

Gateway configuration settings
Detailed field descriptions are available for all Cisco-supported gateways and ports that you can add or update
using BAT.
Related Topics
Cisco Catalyst 6000 24 port FXS gateway template field descriptions, on page 368
Digital Access T1 trunks on Cisco VG200 gateway template field descriptions, on page 379
FXS/FXO port configuration field descriptions, on page 372
Port configuration settings, on page 394
T1 PRI or E1 PRI trunks on Cisco VG200 gateway template field descriptions, on page 382
VG200 gateway template field descriptions, on page 365
VG202 and VG204 gateway template field descriptions, on page 367
VG224 gateway template field descriptions, on page 366
VG200 gateway template field descriptions
The following table provides detailed descriptions for VG200 gateway template configuration settings.
Table 27: VG200 gateway configuration settings
DescriptionField
Enter a name of up to 64 characters that identifies the Cisco VG200
gateway template.
Template Name
Enter a description that clarifies the purpose of the device.Description
From the drop-down list box, choose a Cisco Unified Communications
Manager redundancy group.
A Cisco Unified Communications Manager redundancy group includes
a prioritized list of up to three Cisco Unified Communications Managers.
The first Cisco Unified Communications Manager in the list serves as
the primary Cisco Unified Communications Manager. If the primary
Cisco Unified Communications Manager is not available or fails, the
gateway attempts to connect with the next Cisco Unified Communications
Manager in the list and so on.
Cisco Unified Communications
Manager Group
Configured Slots, VICs, and Endpoints
You must specify the beginning port number for some VICs. For example, if the VIC in Subunit
0 begins at 0 and has two ports (0 and 1), the VIC in Subunit 1 must begin at a port number greater
than 1 and have two ports (2 and 3 or 4 and 5).
Note
VG200 gateway has only one
slot.
Note
Cisco Unified Communications Manager Bulk Administration Guide, Release 9.1(1)
OL-28580-01 365
Gateway configuration settings
REVIEW DRAFT - CISCO CONFIDENTIAL