User guide

Related Topics

Add FXS Ports to VG202 or VG204 gateway template, on page 364

Find gateway template, on page 354

Topics related to gateway configuration settings, on page 398

Add FXS Ports to VG202 or VG204 gateway template

Use BAT to add FXS ports on a VG202 or VG204 gateway template. You can use Foreign Exchange Station

(FXS) ports to connect to any POTS device.

Before You Begin

You must add a VG202 or VG204 gateway template before you configure ports. See the Create Cisco VG202

or VG204 gateway template, on page 363 for instructions.

Procedure

Step 1

Find the gateway template to which you want to add FXS ports.

Step 2

From the Gateway Template Configuration window, click the endpoint identifier for the FXS VIC that you

want to configure.

The window refreshes and displays the Gateway Template Configuration window with the endpoint icons.

Step 3

Enter the appropriate Gateway Information and Port Information settings, and click Save.

See the following for field descriptions:

• FXS/FXO port configuration field descriptions, on page 372

• POTS port configuration settings, on page 394

After you insert a POTS port, the window refreshes and displays the POTS port information at the

bottom of the window. An Add a new DN link displays in the Directory Number Information area

in the left panel.

Note

Step 4

Click Add a new DN to add directory numbers to the POTS port or, if you configured another type of port,

go to Step 6, on page 364.

Step 5

To return to the main VG202 or VG204 Gateway Template Configuration window for the gateway to which

you just added the ports, choose Back to MGCP Configuration in the Related Links drop-down list box

and click Go (if you configuring an MGCP gateway).

Step 6

To reset the gateway and apply the changes, click Reset.

Step 7

Repeat Step 2, on page 364 through Step 5, on page 364 to add additional FXS ports.