User guide

Step 4
Click Add a new DN to add directory numbers to the POTS port or, if you configured another type of port,
go to Step 6, on page 363.
Step 5
To return to the main VG224 Gateway Template Configuration window for the gateway to which you just
added the ports, select Back to MGCP Configuration in the Related Links drop-down list box and click Go.
Step 6
To reset the gateway and apply the changes, click Reset.
Step 7
Repeat Step 1, on page 362 through Step 5, on page 363 to add additional FXS ports.
Related Topics
Add or update phone lines in BAT template, on page 26
Create Cisco VG224 gateway template, on page 361
Find gateway template, on page 354
Topics related to gateway configuration settings, on page 398
Create Cisco VG202 or VG204 gateway template
You must create a Cisco VG202 or VG204 template and then add endpoint identifiers for the network modules.
Configure the following endpoint identifiers in the BAT template:
• Foreign Exchange Station (FXS) ports
Procedure
Step 1
Choose Bulk Administration > Gateways > Gateway Template.
The Find and List Gateway window displays.
Step 2
Click Add New. The Add a New Gateway window displays.
Step 3
From the Gateway Type drop-down list box, choose Cisco VG202 or VG204 and click Next. The next Add
a New Gateway window displays.
Step 4
From the Protocol drop-down list box, choose MGCP or SCCP and click Next. The Gateway Configuration
window displays.
Step 5
Enter values for all the fields, and click Save.
See VG202 and VG204 gateway template field descriptions, on page 367 for field descriptions.
When the insert completes, a new Subunit 0 field displays on the pane.
Step 6
In the Subunit 0 field, choose the appropriate type for the subunit field from the drop-down list box, and click
Save.
When the Status indicates that the update completed, the endpoint identifiers display as links to the right of
the subunit drop-down list boxes.
Step 7
Click an endpoint identifier (for example, 0/0) to configure device protocol information and add ports for the
installed types of VICs.
Step 8
To reset the gateway and apply the changes, click Reset.
What to Do Next
Continue configuring endpoint information and ports as needed.
Cisco Unified Communications Manager Bulk Administration Guide, Release 9.1(1)
OL-28580-01 363
Add or edit gateway template
REVIEW DRAFT - CISCO CONFIDENTIAL