User guide

See the Digital Access T1 trunks on Cisco VG200 gateway template field descriptions, on page 379 for details.
Step 4
To reset the gateway and apply the changes, click Reset.
Step 5
See the Port configuration settings, on page 394 for the appropriate settings for the port type that you choose.
Related Topics
Find gateway template, on page 354
Topics related to gateway configuration settings, on page 398
Add T1 PRI or E1 PRI device to VG200 gateway template
You can use BAT to add T1 PRI or E1 PRI device to an VG200 gateway template.
Procedure
Step 1
Find the gateway template to which you want to add FXS ports.
Step 2
From the Gateway Configuration window, click the endpoint identifier of the T1 PRI or E1 PRI port that
you want to configure.
Step 3
Configure the T1 PRI or E1 PRI device protocol settings.
See T1 PRI or E1 PRI trunks on Cisco VG200 gateway template field descriptions, on page 382 for field
descriptions.
Step 4
Click Save.
Step 5
To reset the gateway and apply the changes, click Reset.
Related Topics
Find gateway template, on page 354
Topics related to gateway configuration settings, on page 398
Find gateway template, on page 354
Topics related to gateway configuration settings, on page 398
Create Cisco Catalyst 6000 (FXS) gateway template
Use BAT to create a Cisco Catalyst 6000 FXS gateway template. You must complete all fields unless otherwise
noted.
Procedure
Step 1
Choose Bulk Administration > Gateways > Gateway Template.
The Find and List Gateway window displays.
Step 2
Click Add New.
The Add a New Gateway window displays.
Step 3
From the Gateway Type drop-down list box, choose Cisco Catalyst 6000 24 Port FXS Gateway.
Cisco Unified Communications Manager Bulk Administration Guide, Release 9.1(1)
360 OL-28580-01
Add or edit gateway template
REVIEW DRAFT - CISCO CONFIDENTIAL