User guide

The Gateway Configuration window displays.

Step 4

Enter values for all the fields.

See VG200 gateway template field descriptions, on page 365.

Step 5

Click Save.

When the insert completes, a new field displays on the pane.

Step 6

In the Subunit field(s), choose the appropriate type for each subunit field:

• VIC-2FXS—Foreign Exchange Station (FXS) voice interface card

• VIC-2FXO—Foreign Exchange Office (FXO) voice interface card

• VWIC-1MFT-T1—Voice WAN interface card with one endpoint for T1 CAS or T1 PRI

• VWIC-2MFT-T1—Voice WAN interface card with two endpoints for T1 CAS or T1 PRI

• VWIC-1MFT-E1—Voice WAN interface card with one endpoint for E1 PRI

• VWIC-2MFT-E1—Voice WAN interface card with two endpoints for E1 PRI

Step 7

Click Save.

When the Status indicates that the update completed, the endpoint identifiers display as links to the right of

the subunit drop-down list boxes.

Step 8

Click an endpoint identifier (for example, 1/0/0) to configure device protocol information and add ports for

the installed types of VICs.

For detailed instructions, see the following procedures:

• Add FXS ports to VG200 gateway template, on page 358

• Add FXO ports to VG200 gateway template, on page 358

• Add digital access T1 (T1-CAS) ports to VG200 gateway template, on page 359

• Add T1 PRI or E1 PRI device to VG200 gateway template, on page 360

Step 9

To reset the gateway and apply the changes, click Reset.

What to Do Next

Continue configuring endpoint information and ports as needed.

Cisco VG200 gateway template port additions

The device protocols and port types that can be configured on VG200 gateways vary by the type of installed

voice interface cards.