User guide

Procedure
Step 1
Choose Bulk AdministrationGatewaysGateway Template. The Find and List Gateway Template window
displays.
a) To edit an existing gateway template, see the Find gateway template, on page 354 and select the gateway
that you want to edit.
See the field descriptions for your gateway.
• VG200 gateway template field descriptions, on page 365
• VG224 gateway template field descriptions, on page 366
• VG202 and VG204 gateway template field descriptions, on page 367
• Cisco Catalyst 6000 24 port FXS gateway template field descriptions, on page 368
b) To add a new gateway, click Add New. The Add a New Gateway window displays.
Step 2
Complete one of the following procedures:
a) To create a VG200 template, see the Create Cisco VG200 gateway template, on page 356.
b) To create Cisco Catalyst 6000 (FXS) Ports template, see Create Cisco Catalyst 6000 (FXS) gateway
template, on page 360.
c) To create a VG224 template, see the Create Cisco VG224 gateway template, on page 361.
d) To create a VG202 or VG204 template, see the Create Cisco VG202 or VG204 gateway template, on
page 363.
Create Cisco VG200 gateway template
You must create a Cisco VG200 template and then add endpoint identifiers for the network modules. Configure
the following endpoint identifiers in the BAT template:
• Foreign Exchange Station (FXS) ports
• Foreign Exchange Office (FXO) trunks
• T1 PRI trunks
• E1 PRI trunks
• T1 CAS trunks
Procedure
Step 1
Choose Bulk Administration > Gateways > Gateway Template.
The Find and List Gateway window displays.
Step 2
Click Add New.
The Add a New Gateway window displays.
Step 3
From the Gateway Type drop-down list box, select Cisco VG200 and click Next.
Cisco Unified Communications Manager Bulk Administration Guide, Release 9.1(1)
356 OL-28580-01
Add or edit gateway template
REVIEW DRAFT - CISCO CONFIDENTIAL