User guide

Procedure

Step 1

Create a Cisco Catalyst 6000 (FXS) gateway template. See the Create Cisco Catalyst 6000 (FXS) gateway

template, on page 360.

Step 2

To define common values for a set of FXS ports, create a Cisco Catalyst 6000 (FXS) ports template. See the

FXS/FXO port configuration field descriptions, on page 372.

Step 3

To define individual values for the FXS ports that you want to add, create a CSV data file. See the Create

CSV data file for Cisco Catalyst 6000 (FXS) ports, on page 407.

Step 4

Insert gateways and ports in the Cisco Unified Communications Manager database. See the Insert gateways

and ports to Cisco Unified Communications Manager, on page 412.

Related Topics

Topics related to gateway configuration settings, on page 398

Add Cisco VG224 gateways using BAT

When using BAT to add the Cisco VG224 gateways to the Cisco Unified Communications Manager database,

you can configure the following types of trunks or ports:

• Foreign Exchange Station (FXS) ports for analog devices

Before You Begin

Before adding the VG224 gateways to the Cisco Unified Communications Manager database, you must first

configure the gateway by using the Cisco IOS software command line interface (CLI). For gateway

configuration procedures and commands, refer to the configuration documentation that is supplied with the

gateway.

Procedure

Step 1

Create a Cisco VG224 gateway template to define common values for a set of gateways and ports. See the

Create Cisco VG224 gateway template, on page 361.

Step 2

Create a CSV data file to define individual values for each gateway and port that you want to add. See the

CSV data files creation for Cisco VG224 gateways and ports, on page 408.

Step 3

Insert gateways and ports in the Cisco Unified Communications Manager database. See the Insert gateways

and ports to Cisco Unified Communications Manager, on page 412.