User guide

Consider overriding the configuration settings as optional.
Step 5
In the Job Information area, enter the Job description.
The default job description for this transaction specifies Insert Intercom DNs.
Step 6
Choose when to add Intercom DNs. Do one of the following:
a) Click Run Immediately to add Intercom DNs immediately.
b) Click Run Later to add Intercom DNs at a later time.
Step 7
To create a job for adding Intercom DNs, click Submit.
Use the Job Configuration window to schedule and/or activate this job.
Related Topics
BAT log files, on page 571
Scheduling Jobs, on page 561
Update Intercom DN field descriptions for UDPs
The following table provides the field descriptions for updating line details in user device profiles.
Table 26: Field description for updating Intercom DN details in UDPs
DescriptionField
Intercom Directory Number Information
Choose a route partition to which the directory number belongs.
The directory number can appear in more than one
partition.
Note
Route Partition
Enter a description that makes the device easy to recognize.Description
This name represents the name that displays during an alert to a shared
directory number. For non-shared directory numbers, during alerts, the
system uses the name that is entered in the Display field.
Alerting Name
This field provides the same information as the Alerting Name field,
but you must limit input to ASCII characters. Devices that do not support
Unicode (internationalized) characters display the content of the Alerting
Name ASCII field.
ASCII Alerting Name
Intercom Directory Number Settings
Choose the calling search space to which this group of UDPs/ports
should belong.
A calling search space specifies the collection of route partitions that
are searched to determine how a dialed number should be routed.
Calling Search Space
Cisco Unified Communications Manager Bulk Administration Guide, Release 9.1(1)
OL-28580-01 347
Update Intercom DN field descriptions for UDPs
REVIEW DRAFT - CISCO CONFIDENTIAL