User guide

DescriptionField
This parameter determines the number of seconds that Cisco Unified Communications
Manager waits before prompting the user to retrieve a call that the user parked. This
timer starts when the user presses the Park softkey on the phone, and a reminder is
issued when the timer expires.
Default: 60 seconds
If you configure a non-zero value, this value overrides the value of this parameter
set in the Service Parameters window. However, if you configure a value of 0 here,
then the value in the Service Parameters window will be used.
Park Monitor
Reversion Timer
This field allows you to turn this feature on or off. Enter 'T' to enable Cisco Unified
Communications Manager to log missed calls in the call history for that directory
number on the phone. Enter 'F' to disable this feature.
Log Missed Calls
Enter a Pickup Group Name to specify the call pickup group, which can answer
incoming calls to this line by dialing the appropriate pickup group number.
Call Pickup Group
Enter a directory URI to associate with the directory number for this phone. Follow
the username@host format. Enter a username of up to 47 alphanumeric characters.
For the host address, enter an IPv4 address or fully qualified domain name.
Within Cisco Unified CM Administration, you can enter directory URIs
with embedded double quotes or commas. However, when you use Bulk
Administration to import a csv file that contains directory URIs with
embedded double quotes and commas, you must use enclose the entire
directory URI in double quotes and escape the embedded double quotes
with a double quote. For example, the Jared, "Jerry",[e-mail]
directory URI must be input as "Jared,""Jerry"",[e-mail]" in the
csv file.
Note
URI (1-5) on
Directory Number
Enter the partition on which the directory URI belongs. If you do not want to restrict
access to the directory URI, leave the field blank.
URI (1-5) Route
Partition on Directory
Number
Enter a 't' (True) to indicate that this directory URI is the primary directory URI for
this extension. Otherwise, enter an 'f' (False) to indicate that this is not the primary
directory URI for this extension.
You can associate up to five directory URIs to a single directory number,
but you must select one primary directory URI
Note
URI (1-5) Is Primary
on Directory Number
Topics related to UDP line additions
• Add lines to existing UDPs, on page 335
• Add lines to existing UDPs using BAT spreadsheet, on page 336
• UDP line field descriptions in BAT spreadsheet, on page 337
• Add or update phone lines in BAT template, on page 26
Cisco Unified Communications Manager Bulk Administration Guide, Release 9.1(1)
340 OL-28580-01
Topics related to UDP line additions
REVIEW DRAFT - CISCO CONFIDENTIAL