User guide

DescriptionField
From the drop-down list box, enable or disable the Join Across Lines
feature for this device or choose Default to use the service parameter
setting.
• Off—This setting disables the Join Across Lines feature.
• On—This setting enables the Join Across Lines feature.
• Default—This setting uses the Join Across Lines setting that the
service parameter specifies.
Join Across Lines
From the drop-down list box, choose the Always Use Prime Line setting
that you want to use from the following values:
• On
• Off
• Default
Always Use Prime Line
From the drop-down list box, choose the Always Use Prime Line for
Voice Message setting that you want to use from the following values:
• On
• Off
• Default
Always Use Prime Line for Voice
Message
From the drop-down list box, choose the Feature Control Policy for this
group of UDPs.
A feature control policy specifies the appearance of features and the
associated softkeys that display on the UDP.
Feature Control Policy
Check this check box if the system must ignore presentation indicators.Ignore Presentation Indicators
(internal calls only)
If you want to enable the DND feature, check this check box.Do Not Disturb
From the drop-down list box, choose a DND option from the following
options:
• None
• Ringer Off
• Call Reject
• Use Common Phone Profile Setting
DND Option
Cisco Unified Communications Manager Bulk Administration Guide, Release 9.1(1)
320 OL-28580-01
Choose update parameters
REVIEW DRAFT - CISCO CONFIDENTIAL