User guide

a) Add new fields by choosing them from the Device Fields, Line Fields, or Intercom DN Fields box, and
then clicking the arrow to move the chosen fields into the Selected Device Field Order, Selected Line
Fields Order, or Selected Intercom Fields Order box.
b) Remove the chosen fields by choosing them from the Selected Device Fields Order, Selected Line Fields
Order, or Selected Intercom Fields Order box, and then clicking the arrow to move the chosen fields into
the Device Field or Line Fields box.
c) Change the order of the fields by choosing a field name in the Selected Device Field or Selected Line
Fields box and using the up or down arrow to change its location.
Step 4
After making your changes, click Save to save the changes to the file format.
.
Related Topics
Find UDP file format, on page 303
Delete UDP file format
You can delete an existing user device profile file format for the CSV data file.
Procedure
Step 1
Find the UDP File Format you want to delete.
Step 2
In the Search result area, click the file format name that you want to delete.
The File Format Configuration window displays. Verify that you want to delete this file.
Step 3
To remove the file format from the File Format Name list, click Delete. A message asks you to confirm that
you want to delete the file format. Click OK to continue.
The file format name is removed from the list.
You can also delete a file format by checking the corresponding check box and clicking Delete. You
can delete all the file formats by clicking Select All and then clicking Delete Selected.
Tip
Related Topics
Find UDP file format, on page 303
Cisco Unified Communications Manager Bulk Administration Guide, Release 9.1(1)
306 OL-28580-01
User device profile file format setup
REVIEW DRAFT - CISCO CONFIDENTIAL