User guide

Procedure
Step 1
Find the UDP template you want to copy.
Step 2
From the list of displayed templates, click the template name you want to copy.
The chosen template details display in the UDP Template Configuration window.
You can also copy the template by clicking the icon in the Copy column corresponding to the template
you want to copy.
Note
Step 3
Verify that this is the template that you want to copy and click Copy.
The template reproduces and creates a copy. The copy duplicates all the values that were specified in the
original template.
Step 4
In the User Device Profile Template Name field, enter a new template name, up to 50 alphanumeric characters.
Step 5
Update the fields as needed for the new template.
Step 6
Click Save. The template that is added to BAT displays in the Templates column on the left.
Related Topics
Find user device profile template, on page 295
Delete user device profile template
You can delete BAT user device profile templates when you no longer require them.
Procedure
Step 1
Find the UDP template you want to delete.
Step 2
From the list of displayed templates, click the template name you want to delete.
The chosen template details display in the UDP Template Configuration window.
You can also delete the template by checking the check box next to the template name and clicking
Delete Selected.
Note
Step 3
Verify that this is the template that you want to delete and click Delete. A message displays that asks you to
confirm the delete operation.
Step 4
Click OK to delete the template.
The template name disappears from the list of templates in the Find and List UDP Templates window.
Related Topics
Find user device profile template, on page 295
Cisco Unified Communications Manager Bulk Administration Guide, Release 9.1(1)
OL-28580-01 301
Modify user device profile BAT template
REVIEW DRAFT - CISCO CONFIDENTIAL