User guide

DescriptionField
Enter the login user ID for a default profile. After the user logs out
from using the user device profile, the user device profile will
automatically log in to this login user ID and use the default profile.
You can obtain help in finding a valid login user ID by
choosing the Select Login User ID link below the Login User
ID field. A separate dialog box pops up. In the Login User
ID field, enter the first few characters of the login user ID
that you want to use, and all login user IDs that match the
pattern that you entered will display in the Selected login
user ID field. Choose the desired ID and click OK.
Note
Login User ID
Modify user device profile BAT template
You can modify the properties of an existing BAT template when you want to change only a few fields for
the same device.
Procedure
Step 1
Find the UDP template you want to modify.
Step 2
From the list of displayed templates, click the template name you want to modify.
The chosen template details display in the UDP Template Configuration window.
Step 3
Verify that this is the template that you want to modify.
Step 4
Modify the details in the template fields as needed.
Step 5
Click Save to save the changes to the existing template.
Related Topics
Find user device profile template, on page 295
Copy user device profile template
You can copy the properties of a template into a new template when you want to change only a few fields.
The new template that you create must be the same device type as the original template, such as
Cisco IP User Device Profile model 7960.
Note
Use the following procedure to copy an existing BAT template.
Cisco Unified Communications Manager Bulk Administration Guide, Release 9.1(1)
300 OL-28580-01
Modify user device profile BAT template
REVIEW DRAFT - CISCO CONFIDENTIAL