User guide

DescriptionField
Enter the Always Use Prime Line setting that you want to use from
the following values:
• On
• Off
• Default
Always Use Prime Line
Enter the Always Use Prime Line for Voice Message setting that you
want to use from the following values:
• On
• Off
• Default
Always Use Prime Line for Voice
Message
To specify whether the device can play precedence tones when a
MLPP precedence call is placed, choose one of the following values:
• Default—To inherit the MLPP indication from the device pool.
• Off—Does not send MLPP indication tones.
• On—Sends indication of an MLPP precedence call.
MLPP Indication
To specify whether the device can preempt calls in progress when
placing an MLPP precedence call, choose one of the following:
• Default—To inherit the MLPP preemption setting from the
device pool.
• Disable—Does not preempt calls when it places an MLPP
precedence call.
• Foreceful—preempts calls in progress when it places an MLPP
precedence call.
Do not configure a device with MLPP Indication set to
Off while MLPP Preemption is set to Foreceful.
Note
MLPP Preemption
Enter a hexadecimal value for the MLPP domain associated with this
device. Must be blank or a value between 0 and FFFFFF.
MLPP Domain
Choose the type of expansion module if installed in the phone or
choose <None> for Module 1 and Module 2.
Expansion Module Information
Cisco Unified Communications Manager Bulk Administration Guide, Release 9.1(1)
OL-28580-01 299
User device profile template fields descriptions in BAT spreadsheet
REVIEW DRAFT - CISCO CONFIDENTIAL