User guide

DescriptionField
From the drop-down list box, choose the calling search space to
associate with the alternate party target (destination) number.
Target CSS (MLPP)
Enter the number of seconds (between 4 and 30) after which an MLPP
precedence call will be directed to this directory number’s alternate
party if this directory number and its call forwarding destination have
not answered the precedence call.
Leave this setting blank to use the value that is set in the Cisco Unified
Communications Manager enterprise parameter, Precedence Alternate
Party Timeout.
No Answer Ring Duration (MLPP)
Enter text that identifies this directory number for a line/phone
combination.
The default text specifies English
Line Text Label
Enter the phone number (or mask) that is sent for Caller ID information
when a call is placed from this line.
You can enter a maximum of 30 numbers and “X” characters. The Xs
represent the directory number and must appear at the end of the
pattern. For example, if you specify a mask of 972813XXXX, an
external call from extension 1234 displays a caller ID number of
9728131234.
External Phone Number Mask
You can configure up to 200 calls for a line on a device in a cluster,
with the limiting factor being the device. As you configure the number
of calls for one line, the calls available for another line decrease.
The default specifies 4. If the phone does not allow multiple calls for
each line, the default specifies 2.
For CTI route points, you can configure up to 10,000 calls for each
port. The default specifies 5000 calls. Use this field in conjunction
with the Busy Trigger field.
Maximum Number of Calls
This setting, which works in conjunction with Maximum Number of
Calls and Call Forward Busy, determines the maximum number of
calls to be presented at the line. If maximum number of calls is set for
50 and the busy trigger is set to 40, then incoming call 41 gets rejected
with a busy cause (and will get forwarded if Call Forward Busy is
set). If this line is shared, all the lines must be busy before incoming
calls get rejected.
Use this field in conjunction with Maximum Number of Calls for CTI
route points. The default specifies 4500 calls.
Busy Trigger
Cisco Unified Communications Manager Bulk Administration Guide, Release 9.1(1)
OL-28580-01 291
Add user device profiles
REVIEW DRAFT - CISCO CONFIDENTIAL