User guide

DescriptionField
Enter this parameter to make the pilot number the same as the directory
number for this line. This action proves useful if you do not have a
voice-messaging server configured for this phone.
Voice Mail Profile
Enter partitions that are searched for numbers that are called from this
directory number.
Changes cause an update of the call pickup names that are
listed in the Call Pickup Group field. The setting applies to
all devices that are using this directory number.
Note
Line Calling Search Space
Enter the automated alternate routing (AAR) group for this device.
The AAR group provides the prefix digits that are used to route calls
that are otherwise blocked due to insufficient bandwidth.
Set AAR Group to <None> to prevent rerouting blocked calls.
AAR Group
Enter the music on hold audio source to be played when the user
presses Hold and places a call on hold.
Line User Hold Audio Source
Enter the music on hold audio source to be played when the system
places a call on hold while the user transfers a call or initiates a
conference or call park.
Line Network Hold Audio Source
Enter one of the following values to activate the Auto Answer feature
for this directory number:
• Auto Answer Off <Default>
• Auto Answer with Headset
• Auto Answer with Speakerphone (Intercom)
Make sure that the headset or speakerphone is not disabled
when you choose Auto Answer with Headset or Auto Answer
with Speakerphone.
Note
Auto Answer
Enter the number of seconds to allow the call to ring before forwarding
the call to the Forward No Answer Destination.
No Answer Ring Duration (CFNA)
Enter the Pickup Group Name to specify the call pickup group, which
can answer incoming calls to this line by dialling the appropriate
pickup group number.
To use the BAT phone template entry, leave this field blank.
Call Pickup Group
Enter the number to which MLPP precedence calls should be directed
if this directory number receives a precedence call and neither this
number nor its call forward destination answers the precedence call.
Values can include numeric characters, pound (#) ,and asterisk (*).
Target Destination (MLPP)
Cisco Unified Communications Manager Bulk Administration Guide, Release 9.1(1)
290 OL-28580-01
Add user device profiles
REVIEW DRAFT - CISCO CONFIDENTIAL