User guide

DescriptionField
This field allows you to turn this feature on or off. Enter ‘T’ to enable
Cisco Unified Communications Manager to log missed calls in the
call history for that directory number on the phone. Enter ‘F’ to disable
this feature.
Log Missed Calls
When the parkee is an external party, then the call will be forwarded
to the specified destination in the parker’s Park Monitoring Forward
No Retrieve Destination External parameter. If the Forward No
Retrieve Destination External field value is empty, the parkee will be
redirected to the parker’s line.
Park Monitoring Forward No
Retrieve Destination External
When the parkee is an internal party, then the call will be forwarded
to the specified destination in the parker’s Park Monitoring Forward
No Retrieve Destination Internal parameter. If the Forward No Retrieve
Destination Internal is empty, the parkee will be redirected to the
parker’s line.
Park Monitoring Forward No
Retrieve Destination Internal
This setting uses the settings in the Voice Mail Profile Configuration
window.
When this check box is checked, Cisco Unified Communications
Manager ignores the settings in the Destination box and Calling Search
Space.
Park Monitoring Forward No
Retrieve Internal Voice Mail
This setting uses the settings in the Voice Mail Profile Configuration
window.
When this check box is checked, Cisco Unified Communications
Manager ignores the settings in the Destination box and Calling Search
Space.
Park Monitoring Forward No
Retrieve External Voice Mail
Choose the calling search space to apply to the directory number.Park Monitoring Forward No
Retrieve External CSS
Choose the calling search space to apply to the directory number.Park Monitoring Forward No
Retrieve Internal CSS
This parameter determines the number of seconds that Cisco Unified
Communications Manager waits before prompting the user to retrieve
a call that the user parked. This timer starts when the user presses the
Park softkey on the phone, and a reminder is issued when the timer
expires.
Default: 60 seconds
If you configure a non-zero value, this value overrides the value of
this parameter set in the Service Parameters window. However, if
you configure a value of 0 here, then the value in the Service
Parameters window will be used.
Park Monitoring Reversion Timer
Always use a unique E.164 number. Do not use null value.E164
Cisco Unified Communications Manager Bulk Administration Guide, Release 9.1(1)
OL-28580-01 289
Add user device profiles
REVIEW DRAFT - CISCO CONFIDENTIAL