User guide

Manager phone settings for shared line mode
When you create the BAT template to add new or update existing manager phones with shared lines, use the
following phone settings:
• Assign the Softkey template: Standard Shared Mode Manager.
• Add primary lines to share with assistants, if needed.
• Set up the voice-messaging profile on the primary line.
• Add an incoming intercom line (optional).
• Add speed-dial buttons for outgoing intercom targets (optional).
• Set the user locale.
Related Topics
Add phones to database, on page 23
Set up phones in shared line mode for Cisco Unified Communications Manager Assistant, on page 254
Assistant phone settings for shared line mode
When you create the BAT template to add new or update existing assistant phones with shared lines, use the
following phone settings:
• Assign the Softkey template: Standard Assistant
• If you are using a Cisco 14-button expansion module (7914) for additional lines, specify the expansion
module type in the BAT template.
Cisco Unified IP Phone 7960 phone button templates include expansion module lines.Note
• Add a personal primary line.
• Add shared lines for each associated manager. Use the same directory number and partition as the primary
line on the manager phone.
• Add an incoming intercom line (optional)
• Add speed dials to the managers intercom lines (optional)
• Set the user locale
Related Topics
Add phones to database, on page 23
Set up phones in shared line mode for Cisco Unified Communications Manager Assistant, on page 254
Cisco Unified Communications Manager Bulk Administration Guide, Release 9.1(1)
OL-28580-01 255
Phones and Lines for Cisco Unified Communications Manager Assistant
REVIEW DRAFT - CISCO CONFIDENTIAL