User guide

Default ValueField
Intercom line
• CSS = Generated_CSS_I_E
• Partition = Generated_Everyone
• Also configure auto answer with headset option.
Line 7
(On Expansion Module)
Manager and assistant proxy line configurations
BAT assigns Unified CM Assistant line configurations by mapping the primary manager lines on the phone
to proxy lines on the assistant phone. When you use the Unified CM Assistant manager and assistant default
templates that the Unified CM Assistant wizard created, you can associate from one to five manager lines on
one assistant phone. For phones that are configured with the Unified CM Assistant templates, this example
shows the line configurations when you associate two manager phones to an assistant phone.
Manager 1 Phone:
• Line 1— Primary line
• Line 2— Intercom line
Manager 2 Phone:
• Line 1— Primary line
• Line 2— Intercom line
Assistant Phone:
• Line 1—Primary line
• Line 2—Proxy line for Manager 1
• Line 3—Proxy line for Manager 2
• Lines 4 through 6 are unassigned
• Line 7—Intercom line
Assistant Phone:
Lines 4 through 6 remain available for other manager associations.
When you associate multiple managers to an assistant phone, BAT creates proxy lines based on the order in
the CSV data file. BAT creates the first manager-assistant line by assigning all the primary manager lines as
proxy lines to the unassigned lines on the assistant phone. BAT continues creating individual manager-assistant
proxy lines based on the order of the CSV record until all lines on the assistant phone are assigned or all
managers in the CSV record are associated.
When you associate multiple assistants to a manager primary line, BAT assigns assistants to the manager
based on the order in the CSV data file. BAT assigns the primary manager lines based on the first assistant
Cisco Unified Communications Manager Bulk Administration Guide, Release 9.1(1)
250 OL-28580-01
Phones and Lines for Cisco Unified Communications Manager Assistant
REVIEW DRAFT - CISCO CONFIDENTIAL