User guide

Related Topics
BAT log files, on page 571
Scheduling Jobs, on page 561
Reset or restart phone using custom file
You can create a custom file of phones that you want to reset or restart using a text editor. You can use either
device names or directory numbers in the custom file.
Before You Begin
1
Create a text file that lists one of these details for the phones that you want to reset or restart:
• Device names
• Description
• Directory numbers
Put each item on a separate line in the text file.Note
2
Upload the file to the first node of Cisco Unified Communications Manager.
Procedure
Step 1
Choose Bulk Administration > Phones > Reset/Restart Phones > Custom File.
The Reset/Restart Phones Custom Configuration window displays.
Step 2
In the Update Phones where drop-down list box, choose the type of custom file that you have created from
one of the following criteria:
• Device Name
• Directory Number
• Description
Step 3
In the list of custom files, choose the filename of the custom file for this update and then click Find.
If no information is entered into the query text box, the system resets or restarts all phones.Caution
Step 4
Click one of the following
• Reset—To reset (power-cycle) the phones
• Restart—To reset phones without power-cycling
• Apply Config—To reset only the settings that have changed since the last reset
Step 5
In the Job Information area, enter the Job description.
Step 6
Choose an insert method. Do one of the following:
Cisco Unified Communications Manager Bulk Administration Guide, Release 9.1(1)
OL-28580-01 165
Reset or restart phone using custom file
REVIEW DRAFT - CISCO CONFIDENTIAL