User guide

• Common Device Configuration
From the second Find Phone where drop-down list box, choose one of the following criteria:
• begins with
• contains
• is exactly
• ends with
• is empty
• is not empty
Step 3
Specify the appropriate search text, if applicable.
To find all phones that are registered in the database, click Find without entering any search
text.
Tip
Step 4
To further define your query, you can choose AND or OR to add multiple filters and repeat Step 2, on page
163 and Step 3, on page 164.
Step 5
Click Find.
A list of discovered templates displays by
• Device Name
• Description
• Device Pool
• Device Protocol
• Status
• IP Address
Step 6
From the list of records, click the device name that matches your search criteria.
Step 7
Click one of the following options:
• Reset—To reset (power-cycle) the phones
• Restart—To reset phones without power-cycling
• Apply Config—To reset only the settings that have changed since the last reset
Step 8
In the Job Information area, enter the Job description.
Step 9
Choose an insert method. Do one of the following:
a) Click Run Immediately to insert phone records immediately.
b) Click Run Later to insert phone records at a later time.
Step 10
To create a job for inserting the phone records, click Submit.
To schedule and/or activate this job, use the Job Configuration window.
Cisco Unified Communications Manager Bulk Administration Guide, Release 9.1(1)
164 OL-28580-01
Reset or restart phone using query
REVIEW DRAFT - CISCO CONFIDENTIAL