User guide

DescriptionField
Choose the calling search space to apply to the directory number.Park Monitoring Forward No
Retrieve Internal CSS
This field allows you to turn this feature on or off. Enter ‘T’ to enable
Cisco Unified Communications Manager to log missed calls in the call
history for that directory number on the phone. Enter ‘F’ to disable this
feature.
Log Missed Calls
Enter one of the following Party Entrance Tone options:
• Default—Use the value that you configured in the Party Entrance
Tone service parameter.
• On—A tone plays on the phone when a basic call changes to a
multi-party call; that is, a barge call, cBarge call, ad hoc conference,
meet-me conference, or a joined call. In addition, a different tone
plays when a party leaves the multi-party call. If the controlling
device, that is, the originator of the multi-party call has a built-in
bridge, the tone gets played to all parties if you choose On for the
controlling device. When the controlling device, for example, the
conference controller, is no longer present on the call or if the
controlling device cannot play the tone, Cisco Unified
Communications Manager does not play the tone even if you choose
On.
• Off—A tone does not play on the phone when a basic call changes
to a multi-party call.
Party Entrance Tone
Enter a directory URI that you want to associate with the directory number
for this phone. Follow the username@host format. Enter a username of
up to 47 alphanumeric characters. For the host address, enter an IPv4
address or fully qualified domain name.
You can associate up to five directory URIs to a single directory
number, but you must select one primary directory URI.
Note
URI on Directory Number
Enter the partition on which the directory URI belongs. If you do not want
to restrict access to the directory URI, leave the field blank.
URI Route Partition on Directory
Number
Enter a ‘t’ (True) to indicate that this directory URI is the primary directory
URI for this extension. Otherwise, enter an ‘f’ (False) to indicate that this
is not the primary directory URI for this extension.
You can associate up to five directory URIs to a single directory
number, but you must select one primary directory URI.
Note
URI Is Primary on Directory
Number
Cisco Unified Communications Manager Bulk Administration Guide, Release 9.1(1)
162 OL-28580-01
Phone line field descriptions for line additions using BAT spreadsheet
REVIEW DRAFT - CISCO CONFIDENTIAL