User guide

DescriptionField
Enter the number of seconds (between 1 and 300) to allow the call to ring,
before forwarding the call to the destination number that is entered in the
Forward No Answer Destination field.
Leave this field blank to use the value that is set in the Cisco Unified
Communications Manager service parameter, Forward No Answer
Timer.
Note
Call Forward No Answer Ring
Duration
Choose the music on hold audio source that plays when the user presses the
Hold button or softkey to put a call on hold.
User Hold Audio Source
Choose the music on hold audio source that plays when the system places
a call on hold such as when user transfers a call or initiates a conference or
call park.
Network Hold Audio Source
Choose this parameter if you want all lines that are updated here to use the
auto answer feature. With auto answer, Cisco Unified Communications
Manager automatically answers calls when a headset is in use. A zip tone
plays to alert the user that an incoming call connected.
Auto Answer
Choose this parameter to make the pilot number the same as the directory
number for this line. This choice proves useful if you do not have a
voice-messaging server that is configured for this phone.
Voice Mail Profile
Choose the type of ring for an incoming call on a phone.Ring Setting When Idle
Choose the type of ring for an incoming call on a phone, which is used when
this phone has another active call on a different line.
Ring Setting when Active
Choose a Pickup Group Name to specify the call pickup group, which can
answer incoming calls to this directory number by dialing the appropriate
pickup group number.
Call Pickup Group Name
Choose the automated alternate routing (AAR) group for this device. The
AAR group provides the prefix digits that are used to route calls that are
otherwise blocked due to insufficient bandwidth.
To prevent rerouting blocked calls, set AAR Group to <None>.
AAR Group
Enter the number to which MLPP precedence calls should be directed if this
directory number receives a precedence call and neither this number nor its
call forward destination answers the precedence call.
Values can include numeric characters, pound(#), and asterisk (*).
Target (Destination)
From the drop-down list box, choose the calling search space to associate
with the alternate party target (destination) number.
MLPP Calling Search Space
Cisco Unified Communications Manager Bulk Administration Guide, Release 9.1(1)
156 OL-28580-01
Phone line update field descriptions
REVIEW DRAFT - CISCO CONFIDENTIAL