User guide

DescriptionField
Check this check box to forward all calls to the number that you chose in
the voice-messaging profile.
Checking this check box makes the values in the Forward All Destination
field and Calling Search Space check box not relevant.
Forward All to Voice Mail
Choose the calling search space to use when a call from an external number
is forwarded to the specified destination.
This setting applies to all devices that are using this directory
number.
Note
Calling Search Space Forward
Busy External
When the parkee is an external party, then the call will be forwarded to the
specified destination in the parker'’s Park Monitoring Forward No Retrieve
Destination External parameter. If the Forward No Retrieve Destination
External field value is empty, the parkee will be redirected to the parker’s
line.
Park Monitoring Forward No
Retrieve Destination External
When the parkee is an internal party, then the call will be forwarded to the
specified destination in the parker’s Park Monitoring Forward No Retrieve
Destination Internal parameter. If the Forward No Retrieve Destination
Internal is empty, the parkee will be redirected to the parker’s line.
Park Monitoring Forward No
Retrieve Destination Internal
Check this check box to use settings in the Voice Mail Profile Configuration
window.
When this check box is checked, Cisco Unified Communications Manager
ignores the settings in the Destination box and Calling Search Space.
Park Monitoring Forward No
Retrieve Internal Voice Mail
Check this check box to use settings in the Voice Mail Profile Configuration
window.
When this check box is checked, Cisco Unified Communications Manager
ignores the settings in the Destination box and Calling Search Space.
Park Monitoring Forward No
Retrieve External Voice Mail
Choose the calling search space to apply to the directory number.Park Monitoring Forward No
Retrieve External CSS
Choose the calling search space to apply to the directory number.Park Monitoring Forward No
Retrieve Internal CSS
This parameter determines the number of seconds that Cisco Unified
Communications Manager waits before prompting the user to retrieve a call
that the user parked. This timer starts when the user presses the Park softkey
on the phone, and a reminder is issued when the timer expires.
Default: 60 seconds
If you configure a non-zero value, this value overrides the value of this
parameter set in the Service Parameters window. However, if you configure
a value of 0 here, then the value in the Service Parameters window will be
used.
Park Monitoring Reversion
Timer
Cisco Unified Communications Manager Bulk Administration Guide, Release 9.1(1)
152 OL-28580-01
Phone line update field descriptions
REVIEW DRAFT - CISCO CONFIDENTIAL